Eddy Merckx – 2010 E Series


Lifetime Warranty
Eddy Merckx believes in the quality of their frames and therefore they all have a limited lifetime warranty.

2010 Eddy Merckx EMX-1 Frame Kit
The Eddy Merckx EMX-1 has been designed to meet the needs of sporting road riders who are looking for a bike to carry them through long fast days in the saddle during cyclo sportives or gran fondo rides, as well as offering the sharp handling and acceleration necessary if you fancy mixing in some road racing.

The EMX-1 frame is constructed from High Modulus 24UDM (unidirectional) carbon fibre, which offers a good balance of weight, stiffness and comfort. The monocoque frame features wishbone rear seat stays that have been redesigned with a slightly curved construction, and as a result there is greater lateral stiffness (especially when teamed up with the massively over sized bottom bracket) while at the same time offering greater vertical compliance. Strong riders and sprinters will benefit from the extra lateral rigidity while ride comfort has been taken to a new level.




2010 Eddy Merckx EFX-1 Frame Kit
The EFX 1 might quite possibly be the perfect women’s specific bike. Merckx geometry virtually eliminates toe overlap issues and when combined with their women’s specific angles and slope, you are guaranteed the right fit. The 24HM carbon lay up means you will get the highest quality carbon that can take stress under use and still remain light weight.

The EFX is the best all around geometry. It accelerates like no other and stabilizes your forward momentum all at the same time, it climbs with agility and descends with confidence. If you are looking for a high end frame that won’t hold you back, geometry and carbon that you can trust, then you are looking for the EFX 1.

Advertisements

30 Comments »

  1. Shaun said

    Hi,

    I am interested in the Amx-5 frame kit may I know how much is it? I m about 1.73m will it fit me? Thanks!

    • jialong84 said

      Hi Shaun,

      Amx-5 (*Hand made in Belgium) frame kit (Frame + Fork + Seatpost + Headset + Seatclamp) is retail @ SG$3400. If you are paying in cash, or intend to build up a bike with us, we can definitely work out a better deal for you. For your height, you should get either size 50, or 52. 🙂

      Do come over to take a look at the frame kit, and discuss further with us.

  2. Brandon said

    Hi,
    May i know how much is the AMX-1? Thanks

    • jialong84 said

      Hey dude,

      Alu AMX-1 CL + Shimano Tiagra retail @ $1900. If payment by cash, I can offer you @ $1800. Do come over and take a look at the bikes… 🙂

  3. Louis said

    hi how much’s an emx-1 with ultegra 6700 gonna cost?

    • jialong84 said

      Hi Louis,

      Eddy Merckx EMX-1 frame kit (Frame + Fork + Seatpost + Headset + Seatclamp) is retail @ $2450. If you are making payment in cash, we can lower it further. Or if you intend to build up a complete bike with us, we are able to offer you great deal on the Ultegra groupset, and other components. Do come over to take a look at the frame kit, and discuss further with on the pricing with us. 🙂

  4. Teck Boon said

    Hi,

    Wat’s d $$$ for a Blue EMX-1 with matching blue seat, handle tape and Eddy Merckx handle setup with the following drivetrain:-
    1. Shimano 105 groupset – S$
    2. Shimano Ultegra groupset – S$
    3. Sram Force groupset – S$

    Wat’s the waiting time? Wat sort of after-sales services you provide?

    Thank you.

    • jialong84 said

      Hey dude,

      Eddy Merckx EMX-1 Frame Kit (Frame + Fork + Seatpost + Headset + Seatclamp) is retail @ $2450. If you are making payment by cash, or getting it together with a groupset, we can offer you better deal for sure. (* I’m unable to quote you here). Thus, do come over to take a look at the frame kit, and at the same time, let us work out a good deal for you! 😉

      1. Shimano 105 groupset – “Retail” @ S$1200
      2. Shimano Ultegra groupset – “Retail” @ S$1500

  5. Vonvon said

    Hi

    How much price for EMX-3 Frameset 2010 or 2011 size 50 or 52?

    Thanks.

    • jialong84 said

      2010 Carbon EMX-3 Frame kit is retail @ $3300. Currently, we are out of stock for EMX-3 but we are submitting an order soon. If you are keen to get this frame kit, kindly come over to discuss with us soon, or drop us an email @ jialong84@live.com … 🙂

  6. cy said

    Hi Bro,

    Can advise on the price for the EMX-5 frame?
    And are you folks bringing in the 2011 models??

    • jialong84 said

      EMX-5 frame kit (* Frame + Fork + Seatpost + Seatclamp) is retail @ $4200. (* Better price for cash payment)

      Currently we have run out of stock for the 2010 model. 2011 will be arriving in about 1-2 months time. 😛

      • cy said

        So the 2011 EMX5 will be the same price as the 2010 series??
        How abt the EMX3??same as well….
        tks

      • jialong84 said

        Yes, we will fit the price at the same range unless there’s a shoot up in the cost. 😛

        Pricing will be announced soon…

      • cy said

        Hi Bro,

        Any updates on the 2011 EMX series??

      • jialong84 said

        We will have news on the 2011 before the end of this month… 😛

      • cy said

        Hi Bro,

        Updates on this?Or u guys still have stock for the 2010 EMX series??
        Do kindly advice.

      • jialong84 said

        Yes, we still have ready stock of 2010 EMX-1 frame kit. What’s the size, or color you are interested in?

      • cy said

        interested in the EMX-3 actually…

      • jialong84 said

        Already out of stock but you might want to consider the 2011 EMX-3. Retail @$3400.

    • cy said

      Tks bro,

      Will drop by the shop for a look….
      tks for the update

  7. Biker said

    Do you guys have a EMX 1 complete bike with Ultegra. What is the price and components like? Ultegra would be good.

    • jialong84 said

      Hi,

      We do not have complete bike ready for EMX-1. What I will suggest is you can consider custom-build one bike with the EMX-1 frame kit. The frame kit + Shimano Ultegra groupset is retail @ $3400. A complete custom-build for this will cost slightly over $4k depend on the components you choose. You might want to head over our shop, and discuss further with uncle so that he can provide you more details, and options to choose from…

      • Biker said

        What size would be good for 1.7m?

      • jialong84 said

        You should go for size 45cm. 🙂

      • Biker said

        Oh forgot to ask what comes with the frame and fork. Seatpost?

      • jialong84 said

        Eddy Merckx Frame Kit includes frame, fork, seatpost, seatclamp, and headset.:)

  8. Jeremy said

    Hi, can i check how much for the EMX-1 and SRAM Rival groupset? Thank you so much.

RSS feed for comments on this post

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: