Eddy Merckx – 2010 A Series


Lifetime Warranty
Eddy Merckx believes in the quality of their frames and therefore they all have a limited lifetime warranty.

2010 Eddy Merckx AMX-2 Complete Road Bike
The Eddy Merckx AMX-2 shows all of the attention to detail for which Merckx himself was renowned, and mirrors the design elements found in their highest level framesets. AMX-2 is constructed from 7046 series triple butted aluminum where 3 different grades of wall thickness are used, depending on the location in the frame. The result is that less aluminum is used where more is not necessary. The AMX-2 adopts Eddy Merckx’s “Performance Geometry”, designed to provide riders with a slightly more stable and forgiving position on the bike, while retaining the sporty feel you would expect from the undisputed master of road racing.


2010 Eddy Merckx AMX-1 Complete Road Bike
The AMX-1 frame is constructed from 7005 series triple butted aluminium, which means that the tubing is thicker in places where more material is needed, but thinner in areas where the tubes are under less stress and so can be profiled to reduce weight without compromising strength, while at the same time optimizing the balance of stiffness and flex to provide a strong but smooth riding frameset. The welds are of the very highest quality – so smooth in fact that it is difficult to see where the welds begin – the frame appears almost to have come out of a mold, and it is protected with a hard wearing deep paint finish. The bike is finished throughout with quality components, including colour coded Eddy Merckx seatpost, stem, bars and seatclamp.


26 Comments »

  1. jen said

    Hi,

    I’m interested in the AFX-1 complete bike, but i was wondering if i could get it with the new shimano 105 groupset (5700).

    If I could, how much would it be?
    And if not, could i get the price with the tiagra groupset?

    Thanks.

    • jialong84 said

      Hi,

      AFX-1 only comes in complete bike with Shimano Tiagra groupset. So if you want to install it with the new Shimano 105 groupset, you will probably have to pay for the extra groupset on top of the bike pricing.

      AFX-1 with Shimano Tiagra groupset is retail @ $1900/$1800 (Cash payment). The new Shimano 105 groupset is not yet available. However, I’m able to offer you AFX-1 with Shimano Ultegra groupset @ $2800 as a whole package only. (Cash payment) 🙂

      • jen said

        Thanks a lot!

        I’ll put some thought into a few other options before deciding 🙂

      • jialong84 said

        No problem! Take your time to decide… 🙂

  2. John said

    Does AMX-4 comes in a complete bike? If it doesn’t, what is the cheapest build you can offer with this frame and with the following groupset:
    1) Shimano Tiagra
    2) Shimano 105

    • jialong84 said

      Hey dude,

      Sorry for late reply. The AMX-4/AMX-5 is only available in frame Kit (Frame + Fork + Seat Clamp + Headset + Seatpost) only. The best price for this AMX-4 + Shimano Ultegra = $4100. It’s not advisable to use Tiagra, or 105 on this frame…

      Alternatively, you can consider EMX-1, carbon model instead… $3000++ with Ultegra groupset…

  3. Kai said

    Hi Tiong Hin,

    Can I just check with you how much does it cost to change my road bike drivetrain to full ultegra? Thanks!

    • jialong84 said

      Hey dude,

      Are you referring to chain only ($45), or front/rear der + chain + cassette + crank + bb ($700)?

  4. Kai said

    Thx TH, yup full ultegra with the brakesets as well.. Really appreciate it bro!

    • jialong84 said

      The full ultegra groupset without labour is @ $1350. With labour will be $1500… 🙂

  5. Jeremy said

    hI,
    Im very interested to only get the frame and transfer all my components from my old bike to the new frame. What is the price range for eddy merckx aluminium frames?

    • jialong84 said

      Hi Jeremy,

      The retail of AMX-1 Complete bike is $1900, AMX-2 Complete bike is $2600, scandium AMX-4 (*Hand-made in Belgium) @ $3100, and scandium AMX-5 (* Hand-made in Belgium) @ $3400. AMX-1/2 are only available in a complete bike package whereas AMX-4/5 is available in a frame kit only (Frame + Fork + Headset + Seatpost etc). Currently, we do have ready stock for AMX-5…

      If you are paying in cash, we can lower the price further more for you. Usually we don’t charge labor fee for transfer of components if a customer is buying a frame from us… 🙂

  6. Rez said

    Hello Jialong…i am just into road biking and wanna get a bike…what you suggest for a beginner ya…budget below 2k…iam a big person n stands at 1.83cm…glad to hear your advice ya…thanks

    • jialong84 said

      Hi Rez,

      You can consider AMX-1 sloping size 51 retail @ $1900. If you are paying by cash, we can offer you a better deal @ just $1700. I will advise you to come over, and try it on to make sure this size fits you well first. 😛

      • Julius Nebril said

        Hi Jialong,

        Does the complete AMX-1 bike comes with the campagnolo groupset or shimano?

        Thanks.

      • jialong84 said

        Nope, they are only equipped with Shimano Tiagra groupset. You might want to consider EMX-1 with Ultegra groupset @ $4000 only.

  7. Wan said

    Hello Jialong,

    May I know how much is AMX2 with Ultegra groupset? And is it the 2011 model ? Thanks !

    • jialong84 said

      Hi Wan,

      I’m sorry but the AMX-2 we have in stock are complete range that’s equipped with Shimano 105. The one we have is 2010 model but there isn’t any changes made to AMX-2 for year 2011 except coloring. The major changes for 2011 are the EMX-3, and EMX-5.

      You might want to consider carbon EMX-1 equipped with Ultegra groupset @ just $3400. A complete custom-build for this will cost slightly over $4k…

  8. khai said

    Hi TH!

    Just gotta AM-2 from there and gotta say Im very satisfied with the svc and all! Thanks for all the help rendered guys!

    • jialong84 said

      Hey dude,

      Thanks for the compliments, and I’m glad you are happy with our services. If you have a pic of your AMX-2 to share, do send it to us @ jialong84@live.com so that I can share it with everybody in our facebook page. 🙂

  9. noobie said

    hi

    if i get a frame frm you and have a groupset to be installed into the new frame, how much would it cost for the labour and does the frameset includes handle bars and stem etc?

    thank you

    • jialong84 said

      Hey dude,

      If you are planning to purchase a frame + groupset from us, there won’t be any extra installation, or labour fee unless there’s a need to lace up your wheelset. 😛

      Frameset usually consist of Frame + Fork + Headset + Seat Clamp + Seatpost only. Most frameset won’t include bar, and stem as individual has their preference on the length of stem, and the wideness of bar. 😛

  10. kenny said

    hi..would like to know whether 2010 Eddy Merckx AMX-2 Complete Road Bike the one with red white black theme still have stock for it?

    • jialong84 said

      We still have one last piece of 2010 Eddy Merckx AMX-2 in Red/White. What’s the size you are looking at? Your height???

      • Kenny said

        My height is 173…what’s the price for it too..

      • jialong84 said

        Can quote you @ $2200. Last piece in size 52.

RSS feed for comments on this post

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: